Blue AudioCodes Fax ATA

1. Plug in enclosed power cord to the 12VDC port on the back of the ATA.
   

1. Connect the WAN port on the back of the ATA to an Ethernet cable that connects to the internet (to the wall or a switch, etc.).  The LAN/PC port can be left open.
2. Plug one end of a telephone phone cable to the fax machine and the other end into Phone Port 1 for the first fax machine, Phone Port 2 for the second fax machine (if applicable).

Lights on front should be green within about 10 minutes.  Send and receive test faxes from the fax machine.

• Related Articles

• List of Supported Polycom/Poly/HP Poly and Yealink Devices with Minimum Firmware Requirements

  List of Supported Polycom/Poly/HP Poly and Yealink Devices with Minimum Firmware Requirements This list provides which phones are support (or not) by PressONE Support or Engineering. We want customers to BYOD, but we need to ensure that PressONE can ...

• Compliance Documention for POTS Replacement

  Our POTS Replacement Solution is fully compliant with PCI, HIPAA, FCC, NFPA, and UL privacy requirements. Fire Panel Compliance There are very specific standards and regulations when it comes to services that connect to fire alarms.POTS Replacement ...