How To: Change the Behavior of Transfers via BLF on Yealink Devices

How To: Change the Behavior of Transfers via BLF on Yealink Devices

How To: Change the Behavior of Transfers via BLF on Yealink Devices

Behavior Parameter

transfer.dsskey_deal_type

This configures the transfer mode for the BLF key. When the user presses a configured BLF key during a call, the BLF key behavior depends on the transfer mode.


NotesNote: This feature is only applicable to the Speed Dial key, BLF/BLF List key, or Transfer key with an assigned value.

Permitted Values

  • 0 - New Call: Produces a dial tone for a New Call.
  • 1 - Attended Transfer: Pressing a BLF key on a call will initiate a warm transfer to the BLF destination.
  • 2 - Blind Transfer: Pressing a BLF key on a call will immediately send the caller to the BLF destination.
  • 4 - Optional: Pressing a BLF key while on a call will prompt the user to choose New Call, Attended Transfer, or Blind Transfer.

Note: By default, this option is set to 2 (Blind Transfer).

Examples

  • transfer.dsskey_deal_type="0"
  • transfer.dsskey_deal_type="1"
  • transfer.dsskey_deal_type="2"
  • transfer.dsskey_deal_type="4"

Supported Devices

All phones except the T30P, T30, T19(P) E2, and CP920/925.

Web UI Path

To configure this via the web interface, navigate to:
Features > Transfer > Transfer Mode via Dsskey